Menu

Month: August 2017

Duinopeak community is online now!

0 Comments

Duinopeak community is online now!

Getting Started with Duinopeak SIM808 GPRS/GSM+GPS Shield-GPS Positioning

0 Comments

Prepare Hardware Required hardware as below: Duinopeak SIM808 GPRS/GSM+GPS+Bluetooth all in one Shield Active GPS Antenna An Peakduino UNO or Arduino UNO USB cable for your Peakduino UNO or Arduino UNO 12V/9V/1.5A Power supply

Getting Started with Duinopeak SIM808 GPRS/GSM+GPS Shield-Call up

0 Comments

Make sure your got everyting ready, if not see Hookup Guide and AT Commands Simple Test, let’s get started. First of all we need hook up the hardware as below.

Getting Started with Duinopeak SIM808 GPRS/GSM+GPS Shield-Hookup and Simple Test

0 Comments

As we know, this Duinopeak SIM808 Shield design for use as an extension board of Peakduino/Arduino UNO, and it requires a external power supply. Prepare Hardware Required hardware as below: Duinopeak SIM808

Getting Started with Duinopeak SIM808 GPRS/GSM+GPS Shield-Overview

0 Comments

Introduction SIM808 shield is a GSM and GPS plus Bluetooth three-in-one function shield for Peakduino/Arduino. It is based on the latest GSM/GPS/Bluetooth(optional) module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and

Use Peakduino’s FTDI Basic interface

0 Comments

The FTDI Basic interface of Peakduino The FTDI Basic interface of Peakduino can be used standalone as a USB to TTL conventer. Upload or update the sketch of Arduino promini/pro etc.

Peakduino UNO Geek Plus Quick Started Guide

0 Comments

Introduction The Peakduino UNO is an Arduino-compatible development platform that enables quick-and-easy project prototyping. It can interact with real-world sensors, control motors, display information, and perform near-instantaneous calculations. It enables anyone to

Peakduino UNO Geek Plus VS Arduino UNO R3

0 Comments

What Is The Peakduino UNO Geek Plus? Arduino is one of the most popular physical computing platforms available today. It’s an amazing tool for both experienced and budding electronics enthusiasts. It’s

Getting started with Peakduino UNO – Geek Plus Editon

0 Comments

Are you tired of mediocre Arduino mainboards,  it’s poor quality and you do not know what is going on.  Our 6 years experience as a result, we need a better one

Getting started with Duinopeak GPS Logger Shield-µSD Card GPS Logging for NEO-M8N

0 Comments

Now that we have good GPS data, the final step is to start logging it to a µSD card. Like the last example, this sketch uses TinyGPSplus-for-Neo-M8N, it also uses Arduino’s

Skip to toolbar