Rambo with Graphic LCD 3D Printer kit for Delta Rostock RepRap Dropshipping

Rambo with Graphic LCD 3D Printer kit for Delta Rostock RepRap Dropshipping
Brand: Duinopeak
Product Code: Product 1
Reward Points: 400
Availability: In Stock
Price: $98.00
Ex Tax: $98.00
Price in reward points: 200

2 or more $95.00
Qty:     - OR -   Add to Wish List
Add to Compare
 

RAMBo - High quality and professional 3D printer Motherboard.

Opensource factory Dropshipping 

 

RAMBo (RepRap Arduino-compatible Mother Board) is an all  in one RAMPS class motherboard targeting convenience, reliability, and  performance.Our version is 1.1g

Features:

-  LogicLogic

- Arduino MEGA compatible Atmega2560 and Atmega32u2  processors are compatible with all RAMPS class firmwares

- Crystals for both usb and mcu (timing accurate to  10ppm)

- 4 Thermistor jacks

- All extra pins broken out on both processors (allows  using the 32u2 for LUFA AVR programmer, etc.)

- 2 channel SDRAMPS compatible SPI breakout

- Motor Drivers

- 5 A4982 1/16th microstep motor drivers (A4984 1/8th  prior to v1.1) (2 connectors on Z for Prusa Mendel and other dual Z  printer designs)

- Digital Trimpot for stepper current control

- Current limit on driver IC VCC to prevent permanent  latchup

- Microstep mode configured by MCU through firmware (no  jumpers needed)

- Test points for driver control signals

- Step and Direction pins are on their own ports for  synchronous movement capability

- Extra driver ports broke out for up to 3 additional  drivers (some of the motor extension pins are shared with max endstop  and a pin allocated for SPI-SS extensions)

- PWM DC outputs (Extruders, Fans, Etc.)

- 6 outputs

- Low resistance mosfets for cool running

- Indicator led for each channel

- Power

- Three independent power rails for flexible input power  configurations

- Heated Bed, 15A 12-24V (version earlier than 1.1 limted  to 14A 16V due to fuse rating)

- Extruders and fans, 5A 12-24V (fuse can be exchanged  for up to 10A capacity) 10V-26V input voltage

- Motors and logic, 5A 12-24V (fuse can be exchanged for  up to 10A capacity) 10V-26V input voltage

- The maximum voltage of the Rambo board is 12V

- Built in SMPS for 5V generation from Motor Power Input2

- PCB

- 4 layer

- 2oz copper on all layers

- High quality, High temperature FR4-TG130 PCB

 
12864 LCD Controller with SD Card Slot
High Quality Display and SD card controller for 3D Printers, connects to ramp 1.4 boards, to allow printing from SD card and to give feedback on the current print. 128x64 Pixels LCD display. 
 
 
 
 
12864 Graphic LCD Controller with SD Card Slot * 1
Rambo v1.1g * 1
 
Items' delivery ratio                                                                                                                                                                                                                           
Country
Delivery Time
Working Days (not including holiday)
5-7
8-11
12-14
15-19
20-30
Working Days + Saturday + Sunday
5-12
13-16
17-20
21-25
26-37
United States
Rate (item arrived)
5.1%
50.1%
29.6%
10.5%
4.7%
United Kingdom
Rate (item arrived)
9.9%
63.2%
19.1%
3.4%
4.4%
Australia
Rate (item arrived)
21.4%
50.0%
14.3%
7.2%
7.1%
France
Rate (item arrived)
10.5%
28.6%
43.8%
10.1%
7.0%
Germany
Rate (item arrived)
11.1%
22.2%
30.3%
20.9%
15.5%
Canada Rate (item arrived) 0.0% 47.1 31.4% 17.6% 3.9%
Other Countries
Rate (item arrived)
3.5%
25.0%
47.9%
12.9%
10.7%

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By Duinopeak©