Rambo v1.1 with Luban LCD Console 3D Printing Kit for Delta Rostock Ramps RepRap Dropshipping

Rambo v1.1 with Luban LCD Console 3D Printing Kit for Delta Rostock Ramps RepRap Dropshipping
Brand: Duinopeak
Product Code: Product 15
Availability: In Stock
Price: $108.00
Ex Tax: $108.00

3 or more $103.00
Qty:     - OR -   Add to Wish List
Add to Compare
 

Opensource factory Dropshipping.

 

RAMBo (RepRap Arduino-compatible Mother Board) is an all  in one RAMPS class motherboard targeting convenience, reliability, and  performance.Our version is 1.1g

Features:

-  LogicLogic

- Arduino MEGA compatible Atmega2560 and Atmega32u2  processors are compatible with all RAMPS class firmwares

- Crystals for both usb and mcu (timing accurate to  10ppm)

- 4 Thermistor jacks

- All extra pins broken out on both processors (allows  using the 32u2 for LUFA AVR programmer, etc.)

- 2 channel SDRAMPS compatible SPI breakout

- Motor Drivers

- 5 A4982 1/16th microstep motor drivers (A4984 1/8th  prior to v1.1) (2 connectors on Z for Prusa Mendel and other dual Z  printer designs)

- Digital Trimpot for stepper current control

- Current limit on driver IC VCC to prevent permanent  latchup

- Microstep mode configured by MCU through firmware (no  jumpers needed)

- Test points for driver control signals

- Step and Direction pins are on their own ports for  synchronous movement capability

- Extra driver ports broke out for up to 3 additional  drivers (some of the motor extension pins are shared with max endstop  and a pin allocated for SPI-SS extensions)

- PWM DC outputs (Extruders, Fans, Etc.)

- 6 outputs

- Low resistance mosfets for cool running

- Indicator led for each channel

- Power

- Three independent power rails for flexible input power  configurations

- Heated Bed, 15A 12-24V (version earlier than 1.1 limted  to 14A 16V due to fuse rating)

- Extruders and fans, 5A 12-24V (fuse can be exchanged  for up to 10A capacity) 10V-26V input voltage

- Motors and logic, 5A 12-24V (fuse can be exchanged for  up to 10A capacity) 10V-26V input voltage

- The maximum voltage of the Rambo board is 12V

- Built in SMPS for 5V generation from Motor Power Input2

- PCB

- 4 layer

- 2oz copper on all layers

- High quality, High temperature FR4-TG130 PCB

 
Note: This production support custom, the SD card have two choice, you can choose according your needs, Horizontal or vertical insertion insertion, by default we shipping horizontal insertion style. We also support custom style. Please feel free to contact.
 
Luban is an easy to use LCD control panel interface designed for 3D printers and CNC machines but can also be used for other micro controller projects. It allows your 3D printer to operate without a PC always connected and provides visual indication of things like temperature and peripheral activity. It can also be used on most micro controller / Arduino projects that require a display and control interface. Give that project of yours a professional looking panel!
 
Luban stands for Visual Kinetic control Interface.
 
Luban LCD is based on 2004A LCD Shield and is compatible with the same Arduino library that is uses. Lincomatic also has the faster LIQUIDTWI2 LCD library with support for Luban.
 
Currently Luban LCD works nicely with the latest Repetier firmware and Lincomatic's fork of Marlin. If you can help with other firmware please contact me. It will work with most 3D printer controllers that has at least 128kb of programming space, tested with Azteeg X3, Azteeg X1 v1.5, RAMPS, Sanginololu with 1284P, RAMBo, Gen7 with 1284P and other controllers as it just needs the i2c pins and 2 pins for the encoder to get basic control.
 
If you have a Sanguinololu / Gen 7 based controller with ATMEGA644P chip you would need the ATMEGA1284P mcu upgrade option to make Luban work.
 
Features:
  • 20x4 Character LCD (nice and bright, good viewing angles)
  • I2C communications (less wires)
  • microSD slot with card detect
  • Rotary Encoder with center button
  • Pause/Reset Button
  • 4 way Navigation Buttons
  • 3 addressable LEDs, 1 SD card LED
  • Dimmable backlight using PWM pin
  • Arduino compatible library by adafruit and Lincomatic's LIQUIDTWI2
  • Built-in shift register. 5v and 3.3v compatible(needs 5v for LCD supply)
 
  • Luban LCD Console * 1pcs
  • Smart Connector * 1pcs
  • 10pin Connection cable * 2 pcs
  • Rambo v1.1g * 1

Duinopeak Electro`s mission is to offer you cost effective, reliable and high quality electronic products for your RepRap 3D printer.

At RepRap Electro we specialize in Rambo 3D printer controller motherboards, and other RepRap electronics and accessories. We offer competitive prices and good services for you.
We take great care to support customers as best as possible and ship all orders on time. We are also involved in the RepRap and open source communities and we contribute to the evolution of RepRap any way we can. We look forward to serving you.

1pcs  Rambo Version 1.1g RepRap Arduino-compatible Mother Board 3D printer
Items' delivery ratio                                                                                                                                                                                                                           
Country
Delivery Time
Working Days (not including holiday)
5-7
8-11
12-14
15-19
20-30
Working Days + Saturday + Sunday
5-12
13-16
17-20
21-25
26-37
United States
Rate (item arrived)
5.1%
50.1%
29.6%
10.5%
4.7%
United Kingdom
Rate (item arrived)
9.9%
63.2%
19.1%
3.4%
4.4%
Australia
Rate (item arrived)
21.4%
50.0%
14.3%
7.2%
7.1%
France
Rate (item arrived)
10.5%
28.6%
43.8%
10.1%
7.0%
Germany
Rate (item arrived)
11.1%
22.2%
30.3%
20.9%
15.5%
Canada Rate (item arrived) 0.0% 47.1 31.4% 17.6% 3.9%
Other Countries
Rate (item arrived)
3.5%
25.0%
47.9%
12.9%
10.7%

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By Duinopeak©